Page 2 - Product Care 2016

PRODUCT CARE

How do I clean the Glass?

For the best results use a glass cleaner and a very soft cloth. Please contact [email protected] for
further information

How do I clean Melamine Products?
Best results are achieved using a mild detergent applied with a damp cloth. The surface should be wiped clean with a soft cloth.
Texta/Nikko markers or biro ink, especially when fresh, can be removed by applying lemon or Shellite to the affected area.

How do I clean and maintain Leather Look PU?
When necessary, brush or vacuum away any dust or grit and wipe over the upholstery gently using a damp, soft cloth.
Stubborn dirt can be removed with proprietary leather cleaner suitable for upholstery and a damp soft cloth. Affected areas
should be wiped clean and allowed to dry.
What if I accidentally spill something or damage the product?

Liquid spills should be removed immediately using an absorbent cloth or sponge. If necessary, use luke warm water to clean
the affected area. However, avoid soaking and allow it to dry naturally, away from heating devices or direct sunlight.

Why has my Leather Look PU ‘worn’ or started to ‘peel’?
Perspiration. Leather Look PU is durable and has few natural enemies. However, accumulation of sweat, grime or body oils on
the product, if left unchecked, will cause a break-down of the protective coating. Clean as often as you consider necessary,
paying particular attention to armrests, headrests and cushions. Empire’s standard warranty does not normally cover this type
of issue if the chair is more then 12 months old.
What should I avoid with Leather Look PU?

To avoid damaging or discolouring your leather when cleaning do not use saddle soap, cleaning solvents, oil, varnish, abrasive
cleaners, ammonia or any products containing solvent of silicon. Also, avoid hard rubbing, sharp objects, and exposure to
direct sunlight or intense heat.

How do I keep the paint finish on the product?
A damp chamois will normally be adequate to keep most paint finishes looking good. For more extensive cleaning, apply a
non-abrasive car polish with a soft cloth and buff with a clean cloth. We suggest you work up and down the panel instead of in
a circular motion. Abrasive preparations should be avoided at all costs.

How do I clean Perspex?

For best results, use glass cleaner and a very soft cloth.
How do I clean Polypropylene?
A damp cloth and a mild detergent will produce the best results.

How do I clean powdercoat?

Mild detergent or glass cleaner applied with a damp cloth will result in a lustrous finish.
How do I clean PVC?
Mild detergent or glass cleaner applied with a soft cloth will produce the best results.

How do I clean stainless steel?

Methylated spirits applied with a soft cloth should be used to clean stainless steel, followed by the application of a non-
abrasive car polish with a soft cloth for shining.

How do I clean Timber Veneer?
Veneers have only limited resistance to water and steam, so excess moisture on the surface should be avoided. Spills or
condensation can permeate the coating and lift the veneer and should be wiped clear immediately after they occur.
Veneer surfaces should not be subject to direct heat. Some components of the coating melt under pressure and heat above 75
degrees (c), leaving an impression of the shape of the hot object resting against it. A cup of hot coffee placed directly on the
surface will be enough to cause discolouration to occur.
Do not use solvents to remove grease or stains. The only recommended solvent mixture is equal parts methylated spirits and
water. Ordinary detergent in warm water will keep dust and static attraction to a minimum.
A scratched surface can be rejuvenated by lightly polishing using an automotive wax.

2 empirefurniture.com.au